+8615853332136

Can Carbon Fiber Be Perforated? Does Drilling Of Carbon Fiber Rods Affect Their Strength?

May 04, 2023

Before applying Carbon Fiber Rods And Tubes to machinery, it is inevitable to undergo secondary processing, such as cutting, drilling, connecting, etc. However, the texture of carbon fiber itself is hard and brittle, making secondary processing somewhat difficult. Some companies may have concerns when purchasing carbon fiber rods. Can carbon fibers be perforated? Does drilling of carbon fiber rods affect their strength? Let's answer these questions one by one.

1-201020094933230

 

Can carbon fiber tubes be drilled?

 

The answer is yes, carbon fiber tubes are made of carbon fiber composite materials. Before being rolled, their shape is similar to that of laminates. Although they have high strength, there are also many gaps in the middle. Carbon fiber tubes can be drilled, but there are certain difficulties.

 

What are the difficulties in drilling carbon fiber tubes?

 

Carbon fiber composite materials themselves have high strength, but there is a process called high-temperature hot pressing during the manufacturing process. After this process, carbon fiber tubes become high-strength but brittle tubular products. During drilling, when the drill bit is worn, the cutting torque and heat generated are prone to delamination and tearing of carbon fiber tubes.

 

Layering and tearing often occur on the surface layer on one side of the drilling exit. The most common defect in drilling processing is that when the drilling is close to the drilling exit, the decrease rate of axial force is less than the decrease rate of material strength, causing damage and tearing before the cutting material enters the cutting layer. Therefore, it is necessary to reduce the feed rate when the drilling is close to the drilling exit, so that the drilling force is less than the critical cutting force generated by the defect and the tearing phenomenon at the hole exit is reduced, At the same time, due to insufficient sharpness of the drilling blade, the carbon fiber pipe was not completely cut and drilled through, resulting in tearing and burrs at the hole outlet.

 

20230508175929

Does drilling of Carbon Fiber Rods And Tubes affect their strength?

 

The drilling of carbon fiber tubes is to better fix with other parts. Drilling is similar to leaving a gap in the overall structure, which has a certain impact on the strength around the drilling. However, this effect does not affect the overall performance of Carbon Fiber Rods And Tubes. However, the delamination and tearing caused by drilling are important factors that reduce the performance of carbon fiber pipes.

 

How to solve the possible delamination and tearing caused by drilling carbon fiber pipes?

 

In order to reduce the damage caused to carbon fibers by drilling, two aspects need to be addressed.

 

Firstly, it is a tool for drilling. High speed steel drill bits have better cost-effectiveness, while cobalt drill bits have better wear resistance and thermal conductivity.

 

Secondly, it's about craftsmanship. Through long-term attempts and accumulated drilling experience, technical personnel can proficiently control the feed rate of drilling, combined with readily available tools, greatly improving the efficiency of drilling.

 

Carbon Fiber Rods And Tubes can not only be drilled, but the strength impact after drilling is almost negligible. Of course, the premise is that the manufacturer must have a good tool, and the technical be with rich drilling skills.

 

Find your unique carbon fiber tubes from Shandong Runfeng CFRP Co., Ltd.

 

Send Inquiry